|
IMPACT CRUSHERS TYPE "II/A-III- IV-V- V/S"
The Impact Crusher with swinging armour plates is classified among hammer mills but, in comparison with these, it offers the following advantages:
less wear of armour plates and hammers
less production of fine powder
possibility of processing even moist raw materials without obstruction, as there is normally no grate
possibility of feeding large size raw materials (200χ500 mm)
RANGE OF APPLICATION
Production of granulates and sand of medium hardness rocks.
Primary crusher for clay, kaolin, scraps of refractory material, bricks, grog, glass scraps, foundry slags, salts, lime, cement and gypsum.
BUILDING INDUSTRY
MINING INDUSTRY
CERAMIC INDUSTRY
GLASS INDUSTRY
INDUSTRIAL WASTE
LIME, GYPSUM, CEMENT
BRICKS AND TILES INDUSTRY
FOUNDRY
IMPACT CRUSHER 5S PRIMARY/SECONDARY CRUSHING OF FRIABLE MATERIALS
The IMPACT CRUSHER IMPATTO 5S has been designed by CIMMA S.p.A. specially for the primary size reduction of clays containing hard stones.
Clay up to 20-25% moisture can be processed, thanks to:
the special apron feeder that moves the clays up to the hammers;
the design of discharge opening with vertical walls and special devices.
The IMPACT CRUSHER 5 S accepts a feed size up to 500 mm., even with hard stones.
The crushed product has 50 χ 80 mm. size suitable to feed most types of secondary crushers.
The IMPACT CRUSHER 5S proved to be quite reliable with low maintenance costs
The process after the crusher IMPATTO 5S can follow with usual machinery for clay preparation.
CONSTRUCTION FEATURES
Casing of welded steel plate, fully protected by wear resistant steel plates.
Large rotor with 4 hammers, cast in wear resistant chromium alloy or manganese steel.
Very strong and compact construction.
Very easy maintenance.
Minimum wear.
Small overall dimensions.
Possibility of adjusting the size of the product by varying the position of the armour plates and the speed.
The machine cannot be obstructed by damp materials.
The crusher can be supplied with special bar grate to obtain products with controlled granulometry, only for dry materials.
| OVERALL DIMENSIONS | TECHNICAL DATA | ||||||||
| Type | Lenght | Width | Width Height | Feed opening | Capacity | Power | Speed | Weight | Noise Level without noise insulation systems |
| mm | mm | mm | mm | Ton/h | kw | Giri al 1 - rpm | kg | db | |
| IIA | 1500 | 1600 | 1530 | 500 x 770 | 12 χ 30 | 30 χ 45 | 700 χ 1100 | 2350 | 85 - 90* |
| III | 2300 | 1920 | 1710 | 630 x 880 | 20 χ 50 | 45 χ 75 | 600 χ 1000 | 5600 | |
| IV | 2500 | 2500 | 1910 | 620 x 1070 | 35 χ 80 | 55 χ 90 | 600 χ 900 | 7200 | |
| V/S | 4000 | 2550 | 2400 | 750 x 1070 | 60 χ 120 | 75 χ 110 | 500 χ 900 | 10000 | |
Data and features may change without any previous advice
DOWNLOAD TECHNICAL DATA SHEET
