|
ROLL CRUSHER
Our roll crushers suit the most varied operations and can be supplied equipped with one or two pairs of rolls of size and shape suitable to meet a multiplicity of requirements. A large reduction in output size is achieved, in a single operation, with the crusher fitted with two pairs of rolls whilst models with a single pair give a smaller reduction.
Rolls with large, medium or small teeth can be supplied as can those with grooved or smooth surface, type and size being dependant upon:
a) the properties of the material to be handled
b) the size of the desired product
c) the output per hour required.
Essentially, the roll crusher consist of a welded steel frame which supports the rolls on solid, cast-iron bearings. Each pair of rolls in composed of a powered, rotating cylinder in a fixed position and a spring-loaded moveable cylinder, the latter permitting the passage of hard, foreign bodies, the clearance between the cylinders being adjustable in order to vary, as required, the size of the final product. Drive to the fixed cylinder, or roll, is through a chain which transmits the motion from a speed gear box, the moveable roll being driven from the fixed roll via a pair of steel gears. Special knives scrape the rolls clean, the latter being protected by a steel casing. The specifications of the standard types of crusher are given in the following tables, but suitable combinations of standard elements can be employed to design machines to different specifications.
SOME TYPICAL APPLICATIONS OF ROLL CRUSHERS
Crushers equipped with toothed or corrugated rolls are suitable for:
- Crushing coke, coal or charcoal
- Granulating fertilizers and chimica products in general
- Breaking into lumps such materials as clay, bentonite, sugar, etc
Crushers fitted with grooved or smooth cylinders may be used for:
- Granulatimg and grinding hard and friable products such as glass, quartzite, feldspar, limestone, corundum, grog and similar materials.
SINGLE BREAKING TYPES
| TYPE | II | III | |
| roll diameter | mm. | 300 | 400 |
| working width | mm. | 400 600 800 | 600 800 1000 |
| power required | HP | 5÷10 | 8÷20 |
| TYPE | II | III | |
| upper roll diameter | mm. | 300 | 400 |
| lower roll diameter | mm. | 300 | 400 |
| working width | mm. | 400 600 800 | 600 800 1000 |
| power required | HP | 7÷15 | 15÷25 |
In order to make the utmost use of the advantages offered by the roll crushers, it is essential for the feed to be suitable controlled, and for the distribution to be as even as possible throughout the full width of the rolls. It is advisable to employ one, or more, magnetic plates in the feed conveyor when there is a danger that ferrous metal may be mixed with the uncrushed material.
Our technical service is available to suggest, in every case, the most suitable solution to any problem that may arise in the operation of our crushers.
Data and features may change without any previous advice.